How to Fix ” NTLDR Missing “

How to Fix ” NTLDR Missing “. How to understand and Address Book Missing NTLDR is somewhat tricky. For the middle and upper class is easy but especially beginners class on computer repair, the problem may not be that easy.


  1. “NTLDR is missing Press any key to restart”

  2. “NTLDR is missing Press Ctrl Alt Del to restart”

  3. “Boot: Couldn’t find NTLDR Please insert another disk”


The message “NTLDR missing” usually appear immediately after the computer just turned on, ie immediately after the Power On Self Test (POST) is complete. Cases like this until now only occurs on Windows XP or earlier versions. There are several possible causes of NTLDR errors, including the most common error message “NTLDR is missing”.

Causes of NTLDR Errors

The most common reason for this error is when your PC is trying to boot from the hard drive or flash drive that is not configured to boot, in other words trying to boot from a non-bootable source. This also would apply to media optical drive or floppy drive as the source you are trying to boot.
Possible causes include a corrupt file, file configuration errors, hard drive problems, upgrade the operating system, hard drive corrupt sector, BIOS is outdate, and damage or loose IDE cables.

“NTLDR is missing Press Ctrl Alt Del to restart”

Fixes for NTLDR missing:

Try restarting the PC, NTLDR missing could have happened by chance.
Check the optical drive (CD / DVD), and remove the cord for a while. Remove also all the external drive and then restart the computer. Often times, the “NTLDR is Missing” appears if your PC is trying to boot from a non-bootable CD / DVD, or external hard drive or flash drive. Note: If you find that any of the above drive is the cause of your problem and it is often the case, should the boot order in the BIOS directly from the hard disk drive first.

Check the hard disk drive and other drive settings in the BIOS and make sure they are correct. BIOS configuration tells the computer the drive is not properly setup that can cause problems, including NTLDR errors. Note: Normally no Auto setting for hard disk drive configuration and optical drive in the BIOS which is usually a safe choice if you are not sure what to do.

Restore the NTLDR and files from the Windows XP CD. Restore two important system files from the original Windows XP CD may also resolve the problem.

Repair or replace the boot.ini file. This will prevent the NTLDR error if the cause is the boot.ini file is not properly configured for the installation of Windows XP.

Create a new partition boot sector to the Windows XP system partition. If the partition boot sector has been damaged or is not configured properly, you can receive a message “NTLDR is Missing”.

Fix Windows XP master boot record. NTLDR error messages may also appear if the master boot record is corrupted.

Open and replace all the internal data cable and power cable of hard disk drives. NTLDR error messages could be caused by loose or damaged IDE cables. Try replacing the IDE cables if you suspect may be damaged.

Update your motherboard BIOS. Sometimes, outdated BIOS version can cause the “NTLDR is Missing” error.

Do a repair installation of Windows XP. This type of installation is intended to replace any missing or corrupted files.

If it gets in step 10 above matters are not completed, the curve of total reinstall Windows XP. This type of installation will remove Windows XP from your PC and install it again from scratch.

Replace the hard disk drive and then do a fresh install of Windows XP. If everything above fails, including the installation of a total of the last step, you’re most likely to face the problem of hardware damage the hard disk drive.

Leave a comment

Your email address will not be published.