Differences Hub and Switch


Differences Hub and Switch. Hubs and switches are the type of computer network equipment that allows a device is connected to the Internet network devices. Both are different in the way of passing packets on the network traffic they receive.

Differences Hub and Switch

Network hubs and switches are two very important components of local area networks. They serve to facilitate the connection of one Differences Hub and Switch computer to another computer that creates multiple LAN. Depending on your network needs and size, the choice between hubs and switches will play a vital role in network speeds and network stability.

Differences Hub and Switch

Definition of Hub
‘Hub’ is a term that is sometimes used to refer to any network equipment that connects computers together, but in fact his theory was that the term actually refers to a multi-port repeater.Differences Hub and Switch Types of devices only forward (repeats) all information it receives, so that all devices connected to a port that receives the information.

Hubs repeat any form of information they receive and repeat it so as to allow the expanded network. However, this can generate lots of traffic that actually do not need to be sent to every device on the network.

In a small network which has only a few clien devices only, but again not a problem for the networks, bigger is often used, a piece of network equipment (such as switches) may be needed to help reduce the amount of unnecessary traffic is generated.

Definition of Switch

Switch controls the flow of network traffic based on address information in each packet. A digital switch is connected to its ports by monitoring the packets it receives, and then forwards the packet to the appropriate port only. This allows simultaneous communication switches, increasing bandwidth, so the information can be more quickly accessed.

Switches and hubs typically are used in the same network, the hub has the function to expand the network to provide more ports, while the switches divide the network into smaller ones in the data traffic is less dense.

When using a Hub or Switch?

Differences Hub and Switch

In a small network that is usually less than 30 users, may Hub can easily be overcome network traffic and is the ideal equipment to be used to connect users. But when the network is getting bigger and probably more Differences Hub and Switch  than about 50 users, you may need to use a switch to split the hub, to reduce the amount of unnecessary traffic is generated.

Be Sociable, Share!

Leave a Reply

Your email address will not be published. Required fields are marked *